Pump House support for school

c1127a00-aae7-43d1-931e-6311ee70cdcd

Published: 19 July 2018


Pump House has supplied all rooftop building services support frameworks for the major refurbishment of a school in Swansea.

Bridgend-based contractor J. W. Morris was appointed to carry out the work at Pentrehafod School and chose Pump House Flexi equipment to support air handling units and VRF condensers.
The Flexi frameworks are hot dip galvanised and supplied in lengths and widths to suit each unit being supported. All products are available from stock and Pump House staff were on site to provide the contractor with assistance in building the solutions.

Pump House had to overcome the challenge of supporting the services on a level framework, whilst contending with two significant roof falls, one of two degrees and one of three degree. To overcome this problem, Pump House supplied an alternative foot to its standard product. The dense crumb rubber moulded feet are available with either a 2.5 degree, or 5 degree slope cut to the underside. Pump House supplied its 2.5 degree, 350mm square feet to enable the frameworks to work with both roof falls.

All support frames come complete with adjustable legs incorporating M24 height adjusters, enabling the installer to level the frameworks.

www.pumph.co.uk